Country Style Matte Ceramic Tile

Country style matte ceramic tile is made of natural clay and quartz sand as the main raw materials, with mineral pigments. After ball milling, spray drying and granulation, it is pressed and shaped by molds and then slowly fired in a high-temperature kiln at 1200℃.

Durable
Country style matte ceramic tile is made of high-purity clay and quartz sand, and is fired at 1280℃ to form a dense body structure with a density of 2.3g/cm³. This high density makes the tile extremely wear-resistant, and the surface Mohs hardness reaches 6, which can effectively resist daily handling friction and reduce scratches and breakage on the tile surface.

Moisture-proof
Country style matte ceramic tile has a three-layer protection structure from bottom to surface. The bottom layer is pressed with hydrophobic raw materials, the middle layer is added with nano-level waterproof particles, and the surface is covered with waterproof glaze. Under the synergistic effect of the three layers, the water absorption rate of the tile is as low as 0.5%, which is about 70% lower than that of ordinary tiles. It can effectively resist erosion in a humid environment and reduce hollowing and cracking problems caused by water vapor penetration.

Soft Texture
Country style matte ceramic tile uses a combination of screen printing and glazing technology to form a matte glaze layer with a thickness of about 0.3mm on the surface of the tile. The glossiness of the glaze is controlled between 10-15 degrees, which can not only present the rustic and natural country style, but also avoid visual fatigue caused by reflection.