Daily Tile Knowledge Sharing Three
Mar 23, 2026
Leave a message
Anti slip performance of ceramic tiles: a must-have for household use, especially for families with elderly and children
Anti-slip performance is a key concern for home tile decoration, especially for damp spaces like bathrooms, kitchens and balconies, as poor slip resistance raises fall risks and threatens family safety. Tile anti-slip performance is mainly measured by the Coefficient of Friction (COF), with higher values meaning better grip. Household tiles require a COF ≥ 0.5, while wet zones like bathroom shower areas need a COF ≥ 0.6. There are two main types of anti-slip tiles: one is textured-surface tiles (such as antique and full-body tiles), which boost grip via surface friction - rougher textures mean better anti-slip effect but slightly harder cleaning. The other is glazed anti-slip tiles, which stay slip-resistant in wet conditions even with smooth surfaces by adding anti-slip agents to the glaze, and are easy to clean, ideal for bathrooms and kitchens. When purchasing, besides checking the COF in product specs, you can do an on-site test: sprinkle water on the tile surface and step on it to feel for slippage. Obvious foot friction indicates good grip, while smooth, slippery surfaces mean insufficient anti-slip performance. Note that polished tiles have relatively weak slip resistance and slip easily when wet, so they are not suitable for shower areas; matte and antique tiles have great anti-slip performance, making them top picks for household damp spaces.
Ceramic tile stain resistance: Say goodbye to cleaning troubles, choose the right ceramic tile more worry free
The stain resistance of tiles refers to the ability of the tile surface to resist the penetration of stains (such as soy sauce, oil, ink, juice, etc.), which directly affects the difficulty and aesthetics of tile cleaning, especially suitable for areas such as kitchens and restaurants that are prone to stains. The anti fouling performance of ceramic tiles is mainly related to surface technology and materials: glazed tiles and solid tiles have a dense glaze or porcelain layer on the surface, which can effectively block the penetration of stains and have good anti fouling performance; The surface of polished tiles does not have a glaze layer, has many pores, is prone to absorbing stains, has poor stain resistance, and requires regular waxing and maintenance; Ceramic bricks have a high water absorption rate, and stains can easily penetrate into the interior, making it almost impossible to thoroughly clean and not suitable for dirty areas. When making a purchase, it can be judged through a simple anti stain test: drip soy sauce, ink or other stains onto the surface of the ceramic tile, let it stand for 10-15 minutes, and then wipe it with a damp cloth. If it can be easily wiped clean without leaving any traces, it indicates good anti stain performance; If there are still obvious stains after wiping, it indicates poor stain resistance. In addition, timely cleaning of stains on the surface of tiles in daily use can also extend the service life of tiles and maintain their cleanliness and beauty. It should be noted that even ceramic tiles with good anti fouling properties should avoid prolonged contact with strong acids and alkalis (such as toilet cleaners and disinfectants) to prevent corrosion of the glaze layer and affect their anti fouling performance.
Tile laying process: correctly laying to avoid later hollowing and falling off
The tiling process directly determines tiles' service life and aesthetic look, and common issues like hollowing, peeling or cracking mostly result from non-standard construction. The standard procedure covers five key steps: first, base treatment - clean dust, oil and debris to ensure a flat, dry and firm base, and level uneven spots with cement mortar to prevent hollowing. Second, tile soaking: tiles with water absorption over 0.5% need 2-4 hours of soaking until no longer absorbing water to avoid weak bonding, while porcelain tiles (absorption ≤0.5%) need no soaking and can be laid directly. Third, mix mortar or tile adhesive: use a 1:3 cement-sand ratio for mortar, and select grade C2+ adhesive matching porcelain tiles, stirring evenly without clumps. Fourth, tile laying: apply 3-5mm thick adhesive evenly on the tile back, lay tiles and tap gently with a rubber hammer for flatness and even gaps (1-2mm for general areas, 2-3mm for damp spaces). Fifth, grouting: wait 24 hours for mortar curing, then fill gaps fully with grout to block water seepage; epoxy grout is more decorative and stain-resistant for aesthetic-focused homes. Also, avoid narrow tiles (width ≤5cm) and reserve expansion joints to prevent cracking caused by temperature changes.
